Paddle Mixer for Dry Mortar Cement Mixer

Performance characteristics
 

Compared with other mixers, horizontal screw belt mixer has the advantages of short mixing time, wide adaptability, no damage to mixed materials, easy to clean and clean, the material will not press feed and grinding, and the mixing of coarse and fine materials also has good adaptability. Horizontal screw belt mixer in the state of not destroying the mixture, in the body to produce transverse cross convection, mixing, diffusion and other complex motion, so that the material in a short time to achieve the best mixing effect.
 

Main use

Horizontal screw belt mixer is widely used in chemical industry, battery raw materials, coatings, dyes, pesticides, pharmaceuticals, food, feed, additives, refractories, new materials, electronic plastics, ceramics, chemical fertilizer, metallurgy, mining, dry powder mortar, special building materials and other industries of powder and solid, powder and liquid mixing. The mixing efficiency of horizontal belt mixer is twice that of conical mixer.

Putty powder food and drug mixer horizontal double screw belt mixer stainless steel putty powder mixer

Horizontal screw belt mixer revolutionary changes the traditional process of powder - powder, powder - liquid, solid material, granular material mixing conditions, so that powder powder, powder one liquid, solid material, granular material mixing to high-speed, efficient, easy to operate, convenient cleaning, pollution-free development, marking the significant progress of modern technology. Widely used in medicine, food (such as milk tea, instant tea powder, food additives, flavors, spices, soy protein separation spraying lecithin and so on mixing technology), veterinary drugs, modified starch, paper, chemical, feed, CPE plastic particles and other industries, his unique fuselage and structure doomed to distinctive characteristics:

 

Description of features and advantages:

1, convenient cleaning: meet each batch, each shift time timely, convenient, rapid cleaning of the internal equipment, leaving no dead Angle.

2, high mixing uniformity: can make 1:10000 times the proportion of the material evenly mixed, especially for the larger proportion of the material mixed more obvious advantages. User has done

After field test, 1000 kilograms of flour and about 5 kilograms of red powder were mixed within 10 minutes. After sampling and testing at each corner, the mixing uniformity was very high.

Compared with other mixers mixing uniformity is much higher!

3. Fast mixing speed and high efficiency: usually each batch of materials is mixed in 1-10 minutes to fully mix and stir, which is 6-10 times more efficient than other mixer

Or higher.

4, fast discharge, convenient: usually 1 ~ 2 minutes to finish a batch of material. In the user's field test, the discharge time of 1000 kg flour is 47 seconds.

5. Large loading capacity: the loading capacity (loading coefficient) of the equipment is usually above 70%.

6. Less residue: users always think that the horizontal equipment has a large residual amount, but it is not the case. Because of the gap between the outer screw belt and the U-shaped cylinder wall, we do it in the process of processing

Very small, and discharge screw belt has been running, so that the material to the direction of the discharge valve movement, basically all out of light. Users in the field trial 1000 male

The residue of Jin flour is 5 kg.

7, meet the vacuum feeding, no dust discharge, avoid the whole feeding, mixing, discharging process dust flying.

8, the mixing process is mild, basically will not be damaged the original state of the material.

9, no pollution to the material phenomenon: the stirring mechanism of the equipment is integral, safe and reliable, all angular weld smooth transition, easy to clean; Lubrication parts are all in

Outside the barrel, there is no oil drop or abrasive material penetrating into the material. It can be sealed to prevent dust from entering the material in the air.

10, low requirements for the workshop: the equipment is horizontal, and various forms of driving device and discharging position can be arbitrarily selected, not subject to the height of the workshop, covers an area of restriction.

11, the equipment is stable and reliable, less wearing parts, long service life, easy maintenance and simple operation.

Application.

Product Paramenters

Pre-install Service 
1. 24 hours online to ensure quick response to customers' inquiry or online message; 
2. Guide customers to choose the most suitable machine model; 
3. As client requirement to make Offer detailed specification and competitive prices;

Contract Implement 1. Machine production will be arranged strictly according to the contract;
2. Machine photos will be sent to you for inspection during production;
3. Send customers clearance documents by DHL;
4. Update latest news after delivery and prepare customs clearance;

After-sale Service
1. 12 months warranty except for wear parts;
2. Spare parts (except for wear parts) will be sent for free due to quality problems;
3. In time response to customers about technical problems;
4. New products update for customers' reference
End client local photos:
Technical drawing: